Custom vintage Jeeps, handcrafted in Texas

Restore the factory cable-operated hood release system on your Full-Size Jeep with this professionally restored OEM hood latch assembly for 1981–1991 SJ and J-Series applications.

This original Jeep hood latch assembly has been disassembled, cleaned, inspected and professionally restored, then finished in durable black powder coat for long-lasting protection. The assembly includes the connecting rod, hood latch mechanisms, springs and associated hardware, along with the hood release cable and cable support bracket used with the later inside-release system.

Beginning with 1981 applications, Full-Size Jeeps transitioned to a cable-operated hood release that allowed the hood to be released from inside the vehicle. The 1982 Jeep Technical Service Manual documents this system on Cherokee, Wagoneer and Truck models, including the cable routing along the hood brace rod and attachment to the cable support bracket and hood lock assembly.

Features:

• Original OEM Jeep hood latch assembly

• Professionally restored

• Durable black powder-coated finish

• Includes connecting rod and hood latch mechanisms

• Includes springs and associated hardware

• Includes hood release cable

• Includes cable support bracket

• Factory-style inside cable-operated hood release

• Fits applicable 1981–1991 Full-Size Jeep SJ and J-Series models

• Restored and assembled in-house by Jeep Heritage

• Free ground shipping within the USA.

Vehicle Applications:

• 1981–1983 Jeep Cherokee (SJ)

• 1981–1983 Jeep Wagoneer (SJ)

• 1984–1991 Jeep Grand Wagoneer (SJ)

• 1981–1988 Jeep J10

• 1981–1988 Jeep J20

Important Fitment Note: Please compare your existing hood latch and cable-release configuration with the product photos before ordering. Front-end and grille conversions are common on classic Full-Size Jeeps.

Reference OEM Numbers: J5758026, J5758027, J5758028, J0956418

Restore the factory hood latch and release system on your classic Full-Size Jeep with this professionally restored original hood latch assembly for select Razor, Egg Crate and Boobie grille applications.

This original OEM Jeep hood latch assembly has been disassembled, cleaned, inspected and professionally restored, then finished in durable black powder coat for long-lasting protection. The assembly includes the connecting rod, hood latch mechanisms, springs, associated hardware and the separate manual hood release handle used with this configuration.

This style of manual hood latching system was used on pre-1979 Full-Size Jeep applications, including Wagoneer, Cherokee and J-Series trucks. The separate release handle operates the hood latch mechanism from the front of the vehicle and distinguishes this assembly from other FSJ hood latch configurations used with different grille and front-end combinations. A restored FSJ parts specialist documents the broader manual hood-latch family for 1966–1978 Wagoneer and J-Series trucks and 1974–1978 Cherokee, specifically excluding Rhino-grille applications.

Features:

• Original OEM Jeep hood latch assembly

• Professionally restored

• Durable black powder-coated finish

• Includes connecting rod and hood latch mechanisms

• Includes springs and associated hardware

• Includes separate manual hood release handle

• Designed for select Razor, Egg Crate and Boobie grille applications

• Applicable to select Jeep Wagoneer, Cherokee and J-Series/J-Truck models

• Restored and assembled in-house by Jeep Heritage

• Free ground shipping within the USA.

Important Fitment Note: Multiple hood latch and release configurations were used during Full-Size Jeep production, including different assemblies found behind Razor-style grilles. Please compare your existing hood latch, release handle and grille configuration with the product photos before ordering.

Restore the factory hood latch and release system on your 1979 Full-Size Jeep with this professionally restored original hood latch assembly for Pig Nose grille applications.

This original OEM Jeep hood latch assembly has been disassembled, cleaned, inspected and professionally restored, then finished in durable black powder coat for long-lasting protection. The assembly includes the connecting rod, hood latch mechanisms, springs, associated hardware and the correct manual hood release handle used with this configuration.

The separate release handle mounts at the front latch/grille-support area and operates the hood latch mechanism from behind the grille. AMC factory service documentation specifically identifies this hood release handle and latch arrangement on 1979 Wagoneer, Cherokee and Truck models.

Features:

• Original OEM Jeep hood latch assembly

• Professionally restored

• Durable black powder-coated finish

• Includes connecting rod and hood latch mechanisms

• Includes springs and associated hardware

• Includes separate manual hood release handle

• Correct configuration for 1979 Pig Nose grille applications

• Fits 1979 Jeep Wagoneer, Cherokee and J-Truck models with the corresponding factory front-end configuration

• Restored and assembled in-house by Jeep Heritage

• Free ground shipping within the USA.

Important Fitment Note: This assembly is intended for 1979 Full-Size Jeep models equipped with the corresponding Pig Nose grille and manual hood-release configuration. Grille conversions and front-end swaps are common on classic FSJs, so we recommend comparing your existing latch and release configuration before ordering.

Restore proper hood operation on your classic Full-Size Jeep with this professionally restored original hood latch assembly for Razor grille applications.

This original OEM Jeep hood latch assembly has been disassembled, cleaned, inspected and professionally restored, then finished in durable black powder coat for long-lasting protection. The complete assembly includes the connecting rod, hood latch mechanisms, springs and associated hardware.

Designed for select classic Jeep Wagoneer and J-Series/J-Truck models equipped with the factory-style Razor grille. This version uses the early manual hood-release configuration and differs from later FSJ latch assemblies that utilize a separate release lever or interior cable-operated release.

Features:

• Original OEM Jeep hood latch assembly

• Professionally restored

• Durable black powder-coated finish

• Complete connecting rod and latch mechanisms

• Includes springs and associated hardware

• Manual hood-release configuration

• Designed for Razor grille applications

• Fits select classic Jeep Wagoneer and J-Series/J-Truck models

• Restored and assembled in-house by Jeep Heritage

• Free ground shipping within the USA.

Important Fitment Note: This assembly is intended for select Full-Size Jeeps equipped with the Razor grille and this specific manual hood-release configuration. Multiple hood latch designs were used throughout FSJ production, and grille conversions are common. Please compare your existing latch configuration before ordering.

Restore proper hood operation on your early Full-Size Jeep with this professionally restored original hood latch assembly for Rhino grille applications.

This original OEM assembly has been fully disassembled, cleaned, inspected and restored, then finished in durable black powder coat for long-term protection. The complete assembly includes the connecting rod, hood latch mechanisms, springs and associated hardware for installation.

Designed specifically for classic Jeep FSJ models equipped with the factory-style Rhino grille, including early Jeep Wagoneer and Gladiator applications. The Rhino grille uses a different hood latch configuration than later Razor, Egg Crate, Pig Nose and late-model Full-Size Jeep front ends.

Features:

• Original OEM Jeep hood latch assembly

• Professionally restored

• Black powder-coated finish

• Includes latch mechanisms, connecting rod, springs and associated hardware

• Correct configuration for Rhino grille applications

• Fits select early Jeep Wagoneer and Gladiator / J-Series models

• Restored and assembled in-house by Jeep Heritage

• Free ground shipping within the USA.

Important Fitment Note: This hood latch assembly is intended for Full-Size Jeeps equipped with the Rhino grille configuration. Because grille and front-end conversions are common on classic FSJs, we recommend confirming your existing grille and hood latch configuration before ordering.

One of the most recognizable designs of the early Full-Size Jeep era, the Rhino grille was originally used on select early Jeep Wagoneer, Super Wagoneer, and Gladiator models.

These are genuine original OEM Jeep Rhino grilles—not reproductions. Each grille has been professionally restored and finished using a triple chrome-plating process, producing a brilliant, show-quality finish while retaining the factory dimensions, contours, mounting points, and stamped details of the original Jeep component.

For a high-quality or factory-correct restoration, an original grille provides the fit and authenticity that a reproduction simply cannot duplicate.

Factory Applications

Originally found on select early Full-Size Jeep models, including:

• Early Jeep Wagoneer

• 1966 Jeep Super Wagoneer

• Early Jeep Gladiator / J-Series trucks

Applications can vary by model and production year. Please verify your existing front-end configuration before ordering.

Key Features

• Genuine original OEM Jeep Rhino grille

• Professionally restored

• Triple chrome plated

• Show-quality polished finish

• Original factory dimensions and mounting configuration

• Center grille only; headlight surrounds, hardware, and other components not included

• Free ground shipping within the USA.

Core Charge & Refund Policy

• All purchases require full payment upfront ($2,450).
• Send in a restorable aluminum core and receive up to $500 in Jeep Heritage store credit after approval.
• Buyer covers return shipping costs.

***Store Credit is issued once your core is received and inspected.***

Core Shipping Address:

JeepHeritage LLC
128 Martin Bros Lane
Johnson City, TX 78636

Please include your contact information and order number inside the package for proper refund processing.

Protect the original fuel tank in your classic Full-Size Jeep with a restored original OEM fuel tank skid plate designed for 1980–1991 Jeep Wagoneer, Grand Wagoneer, and Cherokee models.

Unlike reproduction skid plates that attempt to duplicate the original design, these are genuine factory Jeep components removed from original donor vehicles. Each skid plate retains the factory dimensions, mounting locations, contours, and clearances originally engineered for the vehicle—providing the fitment expected from an original part.

Original FSJ fuel tank skid plates are particularly susceptible to corrosion after decades of exposure beneath the vehicle. Finding a usable original has become increasingly difficult, and heavily rusted skid plates can compromise both the appearance and integrity of the factory fuel-tank installation.

Jeep Heritage starts with a solid original OEM skid plate and professionally restores it for continued service. Each assembly is cleaned, inspected, refinished, and powder coated black for improved corrosion resistance and long-term durability.

Original Fit. Restored for Another Life.

The advantage of starting with an original Jeep component is fitment. Rather than relying on a reproduction that may require adjustment during installation, these skid plates retain the geometry and mounting configuration Jeep originally designed for the FSJ chassis. For owners restoring an original Wagoneer, Grand Wagoneer, or Cherokee, that makes this an excellent solution for replacing a deteriorated factory skid plate while retaining original equipment.

Included With Each Skid Plate

Each restored assembly includes:

• 1 Restored Original OEM Fuel Tank Skid Plate

• 1 Fuel Tank Skid Plate Support Shield – J5361629

• 1 Skid Plate Fuel & Vent Filler Hose Shield – J5361592

Both shields are part of the original factory fuel-tank/skid-plate arrangement.

Vehicle Fitment

Designed for the factory fuel-tank configuration found on:

• 1980–1983 Jeep Wagoneer

• 1980–1983 Jeep Cherokee / Cherokee Chief

• 1984–1991 Jeep Grand Wagoneer

Free nationwide shipping on small parts via UPS Ground

Replace missing or damaged interior woodgrain trim on your classic Jeep Grand Wagoneer with original factory pieces removed from donor vehicles.

These original Grand Wagoneer interior woodgrain door trim pieces are the decorative woodgrain-and-bright-metal moldings installed across the upper and lower sections of the interior door panels. Different trim pieces were used depending on the door location and position, including front and rear doors and upper and lower door panel locations.

Unlike reproduction trim, these are original OEM components removed from donor Grand Wagoneers. Each piece has been cleaned and inspected and is in good usable condition, making these an excellent option for replacing a missing, damaged, or heavily worn piece without having to replace an entire door panel or trim set.

Available Woodgrain Finishes

Trim is available in two factory-style woodgrain appearances:

Marine Woodgrain
A lighter woodgrain finish used on select Grand Wagoneer interiors.

Walnut Woodgrain
A darker, richer woodgrain finish used on select Grand Wagoneer interiors.

Because these are original used components, the appearance and tone of the woodgrain may vary slightly from piece to piece due to age, UV exposure, and the vehicle from which the part was removed.

Available Door Trim Pieces

Individual trim pieces are available for various locations throughout the Grand Wagoneer interior, including:

• Upper front door trim

• Segmented upper front door trim

• Upper rear door trim

• Lower front door trim

• Lower rear door trim

• Driver- and passenger-side applications

Select the appropriate woodgrain finish, door location, and trim position when ordering.

Original Used Condition

These are original used Jeep components, not newly manufactured reproductions or fully restored pieces. Each piece has been removed from a donor vehicle and cleaned prior to sale.

Overall condition is good and the pieces are suitable for installation as-is, but normal signs of age and previous use should be expected. Minor scratches, finish variations, fading, or other cosmetic imperfections may be present.

Because these are vintage original parts, available quantities are limited and vary by trim position and woodgrain finish.

Free ground shipping within the USA.